Filter
Top Products
Page 4 of 8
2. When making your selection, choose the tighter fit of the 2 camera clips
that are included.
3. Insert the camera clip into the camera housing.
4. If for any reason you need to change the camera clip size, please open
the pre-cut window at the back side of the camera. Next, use a flat
screw driver to lift up the camera clip enough to remove it from the
camera housing. Change to the correct camera clip and reinsert into the
camera housing. (Refer to the diagrams on the following page).
Diagram 4.A Diagram 4.B
5. For better viewing angles, place the ClipCam at the center of the trunk
lip.
Rear Trunk Lip