Filter
Top Products
1) To operate, press (#3) trunk release button for at least one second to remotely open trunk.
CONVENIENCE AND SAFETY FEATURES
VALET MODE/ STARTER KILL OVERRIDE
The keyless entry will still function normally while in valet mode. In the event of a lost or broken
transmitter, the Starter Disable/Anti-grind must be overridden in order to start the vehicle with the key.
VALET MODE:
1) While engine is running with key, press and hold Program/Valet switch for 4 seconds. Lights will
flash once for Valet ON and twice for Valet OFF. Door locks will also cycle once. Do Not press
brake pedal while pressing Program / Valet switch.
STARTER KILL OVERRIDE:
1) Press and hold BOTH the brake pedal and the Program/Override switch for 4 full seconds.
HOOD OPEN SAFETY SWITCH
Prevents the engine being Remote Started when hood is open. Eliminates risk of injury to someone
working under the hood of the vehicle. When Remote Start is activated, system will turn on ignition for 4
seconds, but will then shut down before engaging starter.
NOTE: If engine has already been started with the hood closed, opening hood will not turn off engine.
DELAYED REMOTE CONTROL OPERATION
This feature was designed to help avoid accidental remote starts. The remote start button must be
pushed for a full second to activate a remote engine start. This will help in case the remote buttons are
pushed inadvertently while in your pocket or purse.
BRAKE PEDAL RESET CIRCUITRY
Prevents starting or shuts off a remote started vehicle when this circuit is active or activated. Prevents
unauthorized tampering. This circuit shuts the system down immediately when brake pedal is pressed if
key is not in ignition and turned to the run position.
OEM ALARM INTERFACE
This programmable feature is designed to Arm or Re-arm factory equipped security systems in
conjunction with remote start and keyless entry (if needed). This feature will maintain the original
integrity and security of your vehicle’s factory equipped systems before, during, or after an aborted
remote start.
ANTI-GRIND / STARTER DISABLE
Prevents User from accidentally grinding the starter if the Ignition key is turned too far to the start
position while engine is already running from the remote starter. Starter circuit is automatically disabled
when doors are locked using remote as an added security feature.
AUTOMATIC THROTTLE PUMPING
This programmable feature is for Remote Starting a carbureted vehicle. An optional solenoid can be
installed to pump the throttle before the starter engages.
SERVICING / JUMP STARTING
Be sure to put your CoolStart™ in Valet mode before having your vehicle serviced. If you have an alarm
system to control your CoolStart™ (RS901), be sure to have it in valet as well or make sure to turn OFF
the Passive / Automatic Arming Mode before delivering the vehicle to be serviced. As an alternative, the