Filter
Top Products
times)
4) Then the system automatically exits program mode and returns to normal operation.
REMOTE ENGINE CONTROL
TIMED SELF-START MODE:
NOTES on Programming Self Start Mode
1) If you do not hold Remote Start button for the full 4 seconds until the lights start flashing, vehicle will
remote start.
2) If after entering Self-Start program mode you do not press any transmitter buttons to set time, after 12
seconds program mode will abort and vehicle will remote start.
3) If you press the Remote Start transmitter button while in the self start program mode, program mode
will abort and vehicle will remote start.
4) Activating any reset line or operating Remote start with transmitter will turn off the Self-Start mode,
i.e.: drive vehicle, turn ignition "on", accidentally step on brake pedal, etc.
CONVENIENCE AND SAFETY FEATURES
KEYLESS ENTRY (POWER DOOR LOCK CONTROL)
This system enables you to remotely lock and unlock the vehicle’s doors (if equipped with power locks)
through the transmitter for safety and convenience. This feature may require extra labor and/or parts to
install.
REMOTE LOCK / UNLOCK:
1) Press Lock or Unlock transmitter button as you near the vehicle.
2) Parking lights will flash twice for unlock and once for lock. If vehicle is remote started, engine will
remain running and lights will flash but return to solid indicating engine is still being controlled by the
remote starter.
NOTES: Doors lock automatically when vehicle is Remote Started. Starter Disable/Anti-grind is
enabled/disabled only with lock/unlock buttons.
REMOTE TRUNK RELEASE:
This feature, if installed, will remotely release a factory electronic trunk through the transmitter. This
feature may require extra labor and/or parts to install and must be programmed during installation.
FLASHING
PRESS
PRESS
0
LOCK
AND
BUTTON
12
HOLD
1,2,3,or 4
SEC
FOR 4
FLASHES
TIMES
SECONDS
1 - 4 TIMES
AFTER
0
OFF
4
SEC
FLASH 1-4 TIMES
CONFIRMATION
START
START
or BRAKE