Filter
Top Products
5
OPERATION AND USE
CHECK HUMIDIFIER PLACEMENT
Place the Humidifier on a hard, lint-free, waterproof, level surface at least
2 feet above the floor, or use the included metal stand.
DO NOT place the humidifier on carpet or a towel. The fan vent is
located on the bottom of the humidifier base. The fan vent MUST
NOT be obstructed.
DO NOT place the humidifier on a wood surface or near furniture
that can be damaged by too much moisture.
CHECK WATER LEVEL SENSOR
Make sure that the Water Level Sensor is secured properly and not
obstructed.
DO NOT operate the humidifier without water in the Water Tank.
DO NOT plug or unplug the Power Cord with wet hands as electric
shock could occur.
ALWAYS use fresh cool water when operating the humidifier.
1. Turn Water Tank upside down and unscrew Water Tank Cap.
2. Fill Water Tank with cool water.
DO NOT fill water all the way to the rim.
DO NOT CARRY FULL WATER TANK BY HANDLE.
ALWAYS HOLD WATER TANK WITH TWO HANDS.
DO NOT use hot water. Use cool tap water.
DO NOT add any medication or salt.
DO NOT pour water into Mist Outlet Channel underneath the Mist Lid.
3. Screw Water Tank Cap back onto Water Tank. Turn the Water Tank
over and place on Humidifier Base, making sure it fits perfectly.
Note: Do not attempt to move the humidifier while Water Tank is
placed on the Humidifier Base. Doing so may cause leakage of water
and/or Humidifier Base to overfill.
4. Plug the power cord into a wall socket and turn on the unit by using
the Power Button. The LCD Display will then illuminate.