Coway MHS-E5010X Humidifier User Manual


 
Maintenance
Unplug the power cord before cleaning.
After using sterilized humidification, the temperature of the water in the reservoir
is hot. Thus, after the water gets cold, clean the appliance.
Clean the 2-way mist outlet, the reservoir and the water tank once every
two days.
Cleaning the water tank
󰬓
- Put tap water in the water tank, wipe it with a
soft cloth and shake the water tank to remove
water scale.
Cleaning the iodine filter
󰬒
- After disconnecting the filter from the Ez water
tank cap, shake it slowly in clean tap water
to wash it.
Cleaning the main body
󰬔
Drain the water in reservoir.
Drain the water in drain direction.
Ensure that water does not enter the vent.
After removing Silver Nano Anti-Bacterial
Tray for cleaning from the main body,
wash it out with clean water and remove
water scale with a soft cloth.
A small quantity of water may remain in
the main body. Remove the remaining
moisture with a soft cloth and attach
the nano-silver antibacterial tray.
Do not disassemble the water level sensor. Doing so may cause appliance failure.
The filter must not be disassembled. Doing so
may damage the ion exchange resin protection
pack and leak the resin.
Iodine filter may break with strong impact.
The lifetime of the iodine filter is 3 months.If an
expired appliance is used, the appliance
performance may be degraded.Thus, replace the
filter.
While the filter is used, yellow liquid may leak from the ion exchange resinoccasionally.
It is not harmful to health.
If 3 months have passed, replace the filter and
use a new one.
Do not use general detergent or soapy water.
Doing so may cause nebulizer damage or bodily
injury as they are sprayed along with water
particles.


