Filter
Top Products
Parts descriptions
Parts Description / Display LED / Control Panel
Water tank lid
2-way mist outlet
Fine spray nozzle
Iodine filter
Nano-silver
antibacterial tray
for cleaning
Cleaning brush
Nebulizer
Control panel
Vent
Power cord
Spray guiding pipe
Water tank
Ez water
tank cap
Air-cleaning
filter
Main body
Water level
sensor
Load
Completely lock the
Water tank lid
while operating
the
appliance.
This is the passage
for water particles.
Do not push the
load intentionally.
After filling water
in the water tank,
firmly lock the
Ez water tank cap
to prevent leakage
of the water.
If the water in the
water tank is low,
this
appliance will
detect it by itself
and stop the
water spray.
Air flowing
into the
appliance is
purified
through this
filter
.
Refer to control panel
instruction
(see Page10)
Bidirectional spray is
available while
fine mist sprayed.
This allows fine
water particles to be
passed and large
water particles to be
removed.
Ion exchange resin
and iodine resin
purify the water.
Change this filter
every three months.
This is used to clean the
nebulizer surface.
Clean this after
dispatching from
the main body.
Wind comes in and out.
Ensure that water does
not enter the vent while
cleaning
the
appliance.
This makes
water mist.