Coway BA13-BR Plumbing Product User Manual


  Open as PDF
of 28
 
20
CLEANING AND MAINTAINING YOUR BIDET
Cleaning the nozzles
1. Press the ‘Nozzle Cleaning’ button on the operation part to the right of the
bidet.
-Nozzlecleaningwaterissprayedandthefrontnozzleisfullyextended.
-Cleanthefrontnozzle.
2. Press the ‘Nozzle Cleaning’ button on the operation part again.
-Nozzlecleaningwaterissprayed,thefrontnozzleretractsitself,andrearnozzle
is extended fully.
-Cleantherearnozzle.
3. If you press the ‘Power’ button or the ‘Nozzle Cleaning’ button on the operation
part again after cleaning the nozzles, nozzle cleaning water is sprayed, and the
rear nozzle retracts itself.
-Ifnobuttonispressedfor2minutesafterthenozzlecleaningstarts,thenozzle
retracts itself automatically.
If excessive force is exerted on the nozzles when cleaning them, the nozzles may no
longer work properly or break. Hold the nozzles lightly when cleaning them.
Whencleaningthenozzles,Nozzlecleaningwaterisemitted.(However,whenmain
watersupplyisnotsupplied(mainwatersupplystopstatus),nonozzlecleaningwateris
emittedandonlythenozzleisextended).
Tips
Cleaning the product body
Apply a neutral detergent to a soft cloth or sponge and clean the product.
-Failingtodosomayresultindeformationorproductdamage.
Do not use thinner or benzene.
Do not clean the product using a coarse scrub or abrasive detergent.
Tips
1210964 BA13 사용설명서_수출영문_(09.03.23).indd 20 2009.3.24 10:13:21 AM
 previous next