Filter
Top Products
23 24
Filter Replacement
How to Replace Filter
Open filter cover and remove filter case.
Take out filter to be replaced from filter case.
Always make sure to unplug power cord prior to filter replacement.
The time of filter replacement may differ according to pollution level and the period of use.
Caution
How to Use
Self Diagnosis
Customer Service
Cleaning
Cleaning of Oil Mist Filter(To be cleaned once every 2 ~ 4 weeks)
Cleaning the Main Body of Product
Wipe with soft and dry cloth.
In case of severe pollution, wipe with slightly
wet cloth. (Do not use abrasives.)
Press button on the side of product.
Pull filter cover forward to open it.
Take the oil mist filter pulling it to the right.
When there is large size dust or usual dust on the oil mist filter, clean it with water from
a shower tap. But if it is seriously contaminated or oily, soak the filter in the detergent
dissolved water for 30 minutes and then rinse it with water
(You may spray detergent dissolved water to get rid of oil on
the filter and then rinse it later).
Be aware of the sharp edges and do not give too much pressure
on the filter. It may be a major cause for malformation of the filter.
The remainder of water may be a
major cause of unpleasant odor
on the filter.
Completely dry the oil mist filter and assemble it in the reverse order.
Put the filter cover in its hinge and push it backward pressing the buttons on the sides.