Filter
Top Products
19 20
How to Use How to Use
Preparing remote control and how to use
Circulation
Push batteries container hook on the bottom at the
back side of the remote control in
direction and at
the same time pull out the batteries container in
direction.
Insert enclosed batteries in its appropriate positions at
the container according to it's + positions at the hook.
Turn on the power and select the desired operation mode.
Lightly press circulation button. Swing grill moves in forward/ backward
direction to control the level of airflow. To lock the position of swing grill,
lightly press circulation button once again.
�
�
Thrust in batteries container with batteries into the
remote control inlet until you hear the clicking sound.
Caution
How to Use
Self Diagnosis
Customer Service
Make sure + directions of the batteries are checked.
※ Use the same procedure above when switching batteries.
While using the remote control
- If the remote control doesn't work, check batteries lifespan.
- If necessary, switch batteries of CR2025.
- If you don't use the remote control for a long time, be careful to pull out the battery from it.
- The lifespan of remote control depends on the usage frequency.
How to use remote control.
- If you use the remote control, place it toward the receiving part of a product.
- The obstacles between the product and remote control may prevent the remote
control from working.
- Do not apply force to the remote control.
- Do not place the remote control in a wet place or under the direct sunlight or near heaters.