Filter
Top Products
Safety Information
Operating Instructions Troubleshooting Tips Customer Service
03 04
Electricity safety
SAFETY INFORMATION
Please read this information to prevent property loss and
ensure your safety.
Danger
Only connect the power
cord to the voltage rating
that matches it on the rating
plate.
It may cause an
electric shock or
a fire.
Do not connect or work on power
cable at your disposition. In case
power cable is broken, make sure
not to change the cable at discretion
and contact Service Center.
It may cause an electric
shock or a fire.
Be sure to take plug out during
repair, maintenance, cleaning
and parts change. Do not
touch the product with a wet
hand.
It may cause an
electric shock.
In case water gets in the power
part, take power plug out and wait
until the product dries completely.
It may cause an
electric shock
or a fire.
Do not pull out power cable,
and do not put into and pull
out power plug continuously.
It may cause an
electric shock.
Clean anything like dust, water
and etc on the power plug. And
clean power part regularly.
do not clean it with volatile matter.
It may cause an electric shock or a fire.
Do not bend power cable not let
the cable be pressed by something
heavy. And do not pull or twist
power cable.
It may cause an
electric shock
or a fire.
Installation safety
Warning
Notice
Install this product in a dry
place.
It may cause an electric shock
or a failure.
Keep away from heater, candle or
cigarette butts.
It may cause a fire.
Do not uses in a place like a
restaurant in where a lot of
oil is used or generated.
It may slow down the
performance.
Do not place anything on the product.
It may cause a failure.
Keep this product out of the
direct rays of the sun.
It may cause discoloration and
decolorization.
Do not install on an inclined plane.
Do not give impact on the product.
It may cause a breakdown or a failure.