Safety Information
Operating Instructions Troubleshooting Tips Customer Service
19 20
-
Make sure to take power plug out prior to filter cleaning.
-
Pre- filter can be recycled by dust removal or water washing.
-
If pre-filter cleaning is not done for a long time, it may cause slow down of
performance of the product.
-
Medium filter, HEPA filter, Ag allergy shield filter, Deodorant filter can not be
recycled by washing. Washing can damage filters.
CLEANING METHOD FILTER CLEANING METHOD
Pre- filter cleaning (Every 2~4 Weeks)
Cleaning the unit
Use a dry and soft cloth to clean the unit.
Use a wet cloth if necessary but do not use a
polisher.
Lift to separate body pulling the lower
part of front cover.
Pull pre- filter handle to take it out.
Remove dust with vacuum cleaner or
water according to pollution level.
Cleaning the lens on the back of the front cover (Every 2 Months)
Remove the front cover from the unit and
use a dry cloth, soft brush, or cotton swab
to dust off the mood light on the back of
the cover.
Use a wet cloth if necessary but do not use a
polisher.
Dry well pre- filter to before installing in
the filter case, and push to the end of the
product. Install front cover in the product
again.
�
Fix Pre-filter in the filter
case hook correctly to
install in the filter case.
Cleaning the front cover
Remove the front cover from the unit and
use a dry cloth or soft brush to dust it off.
Use a wet cloth if necessary but do not use a
polisher.