Filter
Top Products
704530 Rev. A - 7 - Customer First Center · 1121 Highway 74 South · Peachtree City, GA 30269
Port folio
®
Step 3. Remove the socket from the bracket by removing the two Philips screws which secure it in place.
Step 4. Install the new socket using the original screws.
Step 5. Install the lamp. Make sure the lamp does not have any fingerprints, dust or lint.
Step 6. Re-assemble the socket assembly back onto the trim. Be sure to re-assemble the lamp assembly in the
same distribution as before (Narrow, Medium or Wide). Secure with the two thumbscrews.
Step 7. Install the trim back into the housing using the torsion springs.
Wiring Diagrams
1. For Housings with Ballasts requiring dedicated voltage input. Includes Catalog Numbers MD6xxx1E and MD6xxx2E.