Filter
Top Products
LAMP INSTALLATION: :
1. To install the lamp, unlatch both latches (Figure 6). Note: Remove tamper
proof screws first if luminaire includes (TR) tamper-resistant option (Figure
4).
2. Allow lens to swing open (Figure 7). Lens will remain captive.
CAUTION: Support lens while it swings open.
3. Install lamp securely into socket. CAUTION: Verify that lamp source and
wattage correspond with the luminaire label.
4. To close the luminaire, rotate lens back up to position. Lift up the lens and
align with (4) ribs of top lens on both sides(Figure 8).
CAUTION: Latching luminaire closed prior to having proper alignment will
result in lens breakage.
5. Push one side of the latch up to grasp edge of lens and then push inward to
complete latching (Figure 9 & 10). Repeat for the other latch.
EPL Envoy
Parking Luminaire
Sheet 3 of 5
8/20/08 IMI-694
INSTALLATION INSTRUCTIONS
IMPORTANT : READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN FOR FUTURE REFERENCE
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 ADH080771
These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible contingency during installation,
operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your nearest representative.
NOTE: Specifications and dimensions subject to change without notice.
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
PULL TO
UNLATCH
PULL TO
UNLATCH
LAMP
SUPPORT LENS
WHILE IT SWINGS
OPEN
ALIGN THESE RIBS AS
SHOWN BEFORE LATCHING
(OTHER SIDE NOT SHOWN)
LATCH
LENS
LATCH UP TO
GRASP EDGE
OF LENS BEFORE
LATCHING
PUSH TO
LATCH
PUSH TO
LATCH