Filter
Top Products
5. Lift up luminaire onto the (4) four hooks of quick mount plate while guiding
the wires through center access hole (Figure 3).
6. Push luminaire forward for engagement (Figure 3). When it reaches the
full-engaged position, a “CLICK” can be heard.
CAUTION: If full engagement is not reached, it is not yet rigidly installed.
REMOVAL OF LUMINAIRE:
WARNING: Make sure the power to the unit is OFF and allow it to cool.
1. Note: Remove tamper proof screws first if luminaire includes (TR)
tamper-resistant option (Figure 4).
2. To release clasp lock on “quick mount” bracket, push handle inward and
pull luminaire forward (Figure 5).
CAUTION: Do not let luminaire fall. Support luminaire while lowering off of
j-box to resting, hanging position.
3. Remove hanging hook from quick mount plate (Figure 2 & 3).
CAUTION: Support luminaire while removing.
4. For re-installation of luminaire, refer to steps 1 through 6 on Luminaire
Installation.
EPL Envoy
Parking Luminaire
Sheet 2 of 5
8/20/08 IMI-694
INSTALLATION INSTRUCTIONS
IMPORTANT : READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN FOR FUTURE REFERENCE
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 ADH080771
These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible contingency during installation,
operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your nearest representative.
NOTE: Specifications and dimensions subject to change without notice.
Figure 5
TO REMOVE
Figure 4
TAMPER-PROOF
SCREW FOR HANDLE
TAMPER-PROOF
SCREW FOR LATCH
HANDLE
PUSH
PULL