Cooper Lighting IMI-606 Indoor Furnishings User Manual


  Open as PDF
of 5
 
These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible
contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please
contact your nearest representative.
5. Slip the Assembly over the mast arm. Secure Mast Arm Adapter to the mast arm with the four (4) 3/8-16x3/8 Set Screws. Drill a
3/8” hole through the mast arm and install the 3/8” carriage bolt and nut. Use care in drilling hole so as not to damage electrical wires
in the mast arm. Make electrical connections in the Mast Arm Adapter. Install the wire way door with two (2) 6-32x3/8 screws.
See Figure 5.
Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269 IMI-606 AVU040954
Mast Arm Adapter
Sheet 4 of 5
5/26/04 IMI-606
INSTALLATION INSTRUCTIONS
IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.
RETAIN FOR FUTURE REFERENCE.
TM
WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing
or servicing.
Fig. 5
 previous