Filter
Top Products
These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible
contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please
contact your nearest representative.
5a.Attach the Lower Flite Arm (Single Head) -
Attach the LOWER FLITE ARM to the UPPER FLITE ARM using the three (3) 5/16-18 x 1.25” screws provided. Please see
Figure 5a. Be careful to route the wires through and along the arm so that they will not be pinched when the arms are tightened.
Torque: 250 in-lbs.
NOTE: To assure a safe product over time, check and adjust torque to proper settings each time unit is maintenanced.
5b.Attach the Lower Flite Arm (Dual Head) -
Attach the LOWER FLITE ARM to the UPPER FLITE ARM using the three (3) 5/16-18 x 1.25” screws provided. Please see
Figure 5b. Be careful to route the wires through and along the arm so that they will not be pinched when the arms are tightened.
Torque: 250 in-lbs.
NOTE: To assure a safe product over time, check and adjust torque to proper settings each time unit is maintenanced.
Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269 IMI-597 AVU040197
Flite
Sheet 4 of 8
8/31/04 IMI-597
INSTALLATION INSTRUCTIONS
IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.
RETAIN FOR FUTURE REFERENCE.
TM
WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing
or servicing.
Lower Flite Arm
Fig. 5a
Fig. 5b
WARNING
Risk of Personal Injury
Fixture may become damaged and/or
unstable if not installed properly
Tighten all fixture components to their
recommended torque values