Filter
Top Products
318
TRACK LIGHTING Architectural Track
COOPER LIGHTING
HALO
®
LA631, LA632, LA633
Halo Architectural Track (includes dead end and
mounting hardware). Connectors must be
ordered separately.
• LA631–4’ Track. Actual length 42-7/32”
(1072mm).
Finishes: White (P), Black (MB), Silver (SL)
• LA632–8’ Track. Actual length 88-7/32”
(2240mm).
Finishes: White (P), Black (MB), Silver (SL)
• LA633–12’ Track.
Actual length 136-7/8” (3460mm).
Finishes: White (P), Black (MB), Silver (SL)
Halo 2 circuit Architectural 120V and 277V
Track system provides two separate 40
AMP circuits and two neutrals. Each
circuit can be independently switched.
Fully polarized and grounded throughout.
Top portion of track is designed as a
raceway for carrying up to 2 #8AWG
conductors. Raceway can be used to feed
additional sections of track from the
original feed point, minimizing
installation time and cost.
Halo 2 Circuit Architectural Track accepts
Halo Architectural lampholders. When
using Halo power-Trac Lampholders, an
LA1L converter is required (see
Lampholder/Track Compatibility listings
with lampholders). Halo Architectural
Track is suitable for a wide range of
commercial, merchandising and retail
applications.
Structural:
Extruded aluminum .080" [2.03mm]
nominal wall thickness. Raceway Trac is
only 1 7/16” (37mm) deep by 1 13/16”
(46mm) wide.
Line Conductor:
Solid copper alloy bus bars [cross section
equivalent to #8 AWG wire].
Insulating Liner:
Extruded polyvinyl insulator.
Ground Conductor:
Maintains an independent positive
ground path between lampholder, Track
channel and building’s ground system.
Neutral Conductor: 2 neutrals [each
cross section equivalent of #8 AWG wire].
Raceway Capacity for Additional Circuits:
Carries up to two #8 AWG conductors.
Electrical capacity is 40 AMPS.
Listings:
UL/cUL listed for use with Halo 120V and
277V Architectural lampholders.
(See Below)
P=Satin White
MB=Matte Black
SL=Silver
LA631=4'
LA632=8'
LA633=12'
Accessories (Order Separately)
Finishes
Blank=120V
277=277V
VoltageTrack
LA631
L = 4'’
Actual length
42 7/32" [1072mm]
W =1 13/16" [46mm]
H =1 7/16" [34mm]
Finish Codes:
P=White
MB=Black
SL=Silver
Voltage:
Blank=120V
277=277V
LA632
L =8'’
Actual length
88 7/32" [2240mm]
W=1 13/16" [46mm]
H =1 7/16" [34mm]
Finish Codes:
P=White
MB=Black
SL=Silver
Voltage:
Blank=120V
277=277V
LA633
L =12’
Actual length
136 7/32" [3460mm]
W=1 13/16" [46mm]
H =1 7/16" [34mm]
Finish Codes:
P=White
MB=Black
SL=Silver
Voltage:
Blank=120V
277=277V
Connectors
LA670 = Live End Conduit
Connector
LA671 = Live End Connector
LA672 = Flexible Connector
LA673 = Straight Connector
LA674 = “L” Connector
LA675 = “T” Connector
LA676 = “X” Connector
LA678 = Mini Joiner
Finish Codes:
P=White
MB=Black
SL=Silver
Voltage:
Blank=120V
277=277V
Accessories
L900 = Outlet Box Cover
L983 = T-Bar Attachment Clip
L986 = MiniT-Bar Attachment Clip
LA995 = 18” Pendant Kit
LA48 = 48” Steel Stem
LA996 = Wireway Cover for
Pendant Assembly Kit
LA959 = Wireway Cover (gray
only)
DE661 = Dead End
Finish Codes:
P=White
MB=Black
SL=Silver
1-13/16”
[46mm]
1-7/16”
[34mm]
HALO 2-CIRCUIT, 2 NEUTRAL ARCHITECTURAL TRACK
LA1L 120V Halo Architectural Converter
Allows use of 120V Halo Power-Trac or Lazer Track lampholders on Halo Architectural Track. allows any Halo Power-
trac lampholder (excludes low voltage power supplies except L2005) (excludes L3218, L3232, L5130, , L5138) to be
used with Halo Architectural Track. One converter is required for each Power-trac lampholder used.
Finishes: SL=Silver; P=White; MB=Matte Black