Filter
Top Products
7
COMBO EDGE - ACCENT/DOWNLIGHT - 12V AR70
COMBO EDGE - ACCENT/DOWNLIGHT - 12V AR70
Features
• Available in 1, 2 or 3 light fixtures
• Splayed trim inserts have a 1/2” flange
• Architectural deep regress rectangular trim with 77º
tapered aperture provides excellent cut-off
• Independently adjustable locking lamp holders with
368º x 45º adjustability
• Adjustable Plaster Frame can accommodate 1/2” to
1-3/8” ceiling thickness
• Configured with integral electronic transformers
• Electrical J-Box and transformers easily accessed from
below the ceiling
• Includes butterfly brackets for black iron installations
• Optional Relay Emergency Module allows the conversion
of one of the fixture’s lamps to function as a remote emergency
unit when supplied by a 12V DC emergency power source.
Module does not contain batteries. Will operate with 85W
lamp maximum. Wattage consumed in emergency mode is
lamp wattage + 0.9W. (See page 33 for details.)
COMBO EDGE - ACCENT/DOWNLIGHT
Fixture Type
CED1A70 (1) One Light 12V AR70
CED2A70 (2) Two Light 12V AR70
CED3A70 (3) Three Light 12V AR70
Wattage
20 20 Watt 12V AR70
50 50 Watt 12V AR70
Trim Finish
BK Black Alzak
WH White Powder Coat
CA Clear Alzak
PT Custom Color (Specify)
Voltage
120 120V (Standard)
277 277V
Emergency Lighting
EM Relay Emergency Module
Ordering Example
CED3A70-50-CA-120
3 Light Combo Edge Accent/Downlight for AR70 lamp, 50 watt,
Clear Alzak trim, 120V
Options
Optical accessories include: Baffles, Snoots, Louvers and
Lenses. See page 33 for details.
#
!
"
%
$
& '
v
HOUSING DIMENSIONS
FIXTURE TYPE
A B C
CEILING CUT-OUT
1 Light 11.66” 6.66” 11.84” 5.27” x 5.30”
2 Light 15.51” 6.66” 11.84” 9.30” x 5.30”
3 Light 19.36” 6.66” 11.84” 13.15” x 5.30”
TRIM DIMENSIONS
FIXTURE TYPE
D E F G
1 Light 4.50” 5.60” 4.50” 5.60”
2 Light 8.52” 9.62” 4.50” 5.60”
3 Light 12.37” 13.47” 4.50” 5.60”
3 light fixture shown above
Also available in 1 light and 2 light fixtures
TRIM INSERT FINISHES
Black Powder Coat
White Powder Coat
Clear Alzak
Optional Relay Emergency
Module - add “-EM” to the end
of the catalog number
#ONNECTS
TO*BOX