Filter
Top Products
COMBO EDGE
COMBO EDGE ACCENT / DOWNLIGHTS
page 4 - 17
The Accent/Downlight fixtures offer the widest range of application pos-
sibilities. The Combo Edge trim insert has a 2” depth (2.5” on PAR38 mod-
els) with 77º taper which offers greatly reduced lamp glare. The fixture
housing includes an adjustable plaster frame which can accommodate
ceiling thicknesses from 1/2” to 1-3/8”. The height of the lamp holders
adjust to the position of the reflector to always allow optimal lamp placement.
COMBO EDGE WALL WASHERS
page 20 - 32
The Wall Washer fixtures enable clean and even illumination across ver-
tical surfaces. The upper aperture of the trim insert is cut at an angle to
allow the lamp beam greater access for illumination. Combo Edge Wall
Washers are available with trim inserts configured for lateral installa-
tions or transverse installations. These fixtures utilize the same highly
adjustable lamp holder as the accent downlights. Included with every
wall washer is a linear spread lens which increases the spread of light
and helps to even out the lamp beam for a smooth wash of light.
Combo Edge is an all new multi-lamp luminaire which combines all
of the adjustable features of RSA’s Combolight with a new deep regressed
trim. These splayed trims offer increased cut-off due to the deep position of the
lamp source. With independently adjustable locking lamp holders that allow a full
368º x 45º of range, Combo Edge is ideal for retail and museum display applications. Combo
Edge is available with low voltage halogen, line voltage incandescent, metal halide (including the
new BriteSpot ES16 lamp) and compact fluorescent triple tube lamps.
Wall Washer
with Lateral Configuration
Wall Washer
with Transverse Configuration