CFM UVLX30RP Indoor Fireplace User Manual


 
20008845
12
Operating Instructions
The First Firing
On completing the gas line connection, a small amount
of air will be trapped in the gas line. When you first light
the unit with the pilot light, it will take a few minutes to
purge the trapped air. Once you have purged the gas
line, the pilot and burner will light and operate normally.
Subsequent lightings of the appliance will not require
purging the gas line.
When lit for the first time, the appliance will emit a slight
odor for an hour or two. This is due to paint and lubri
-
cants used in the manufacturing process curing under
heat. This is normal. You may wish to have the windows
open to dissipate any odors during the curing process.
Piezo
Ignitor
FP1036
Fig. 11 EuroSIT control valve.
HI
OFF
PILO
T
LO
FP1036
Eurosit Valve
3/9/00 djt
P103
M ser
ies pilot flame
752/PyroM Pilot Flame
968/UVHL
7/27/98
Thermopile
Thermopile
R Series
M Series
752
P103
Fig. 16 Proper pilot flame.
Thermocouple
H
I
L
O
O
F
F
O
N
O
F
F
P
I
L
O
T
O
F
F
E
A
P
I
L
O
T
THTP
TP
TH
FP1395
NOVA
SIT valve
RN/RP
FP1395
Fig. 12 SIT control valve.
PILOT
ON
OFF
L
O
H
I
HV101a
Honeywell valve
UVL
3/18/99 djt
Control Knob
Piezo Ignitor
Hi/Lo Knob
HV101a
Fig. 10 Honeywell control valve.
Flame Appearance
To obtain proper operation, it is imperative that the
pilot and main burner flame characteristics are steady,
not lifting or floating. Refer to Figure 13 -15 for proper
burner flame appearance. Refer to Figure 16 for proper
pilot flame appearance.
LG377
Fig. 13 UVLX18 proper burner flame appearance.
LG377
UVLX18 log flames
12/21/04 djt
Red Glow
LG379
Fig. 14 UVLX24 proper burner flame appearance.
LG379
UVLX24
log fire
12/22/04 djt
Red Glow
LG381
Fig. 15 UVLX30 proper burner flame appearance.
LG381
UVLX30
log fire
12/22/04 djt
Red Glow