Filter
Top Products
To Light cont
■ Hold match as shown.
Turn valve to LIGHT
position and hold for 8-10
seconds.
■ Heater will ignite with a
brief visible flame.
Continue to hold VALVE at
LIGHT position for an
additional 10 seconds.
Release knob. It will return
to ON position. Heater is
NOT adjustable.
To Turn Off
■ Turn FUEL VALVE to
OFF.
■ Allow HEATER to cool
for 10-15 minutes.
■ NOTE: Heater is
designed to be lit with the
valve fully open until it
reaches full output.
Observe heat build up for a
few minutes to ensure
heater is lit. If heater fails
to develop substantial heat,
turn heater “OFF” and
repeat lighting procedure.
DANGER
• EXPLOSION - FIRE HAZARD
• Never store LPG cylinders near high heat, open flames, pilot lights, direct sunlight,
other ignition sources or where temperatures exceed 120 degrees F (49°C).
To Store
7