Filter
Top Products
5
To Set Up
CAUTION
NOTE: Use 7 3/4 oz disposable butane/propane mix cylinder only. Do not connect
to bulk LPG systems. The LP-gas cylinder(s) used with catalytic heaters must be
constructed and marked in accordance with the specifications for LP-gas cylinders
of the U.S. Department of Transportation or Transport Canada, CAN/CSA B339.
■ Attach Heater Assembly to Regulator Assembly hand tight.
• SERVICE SAFETY
• Keep all connections and fittings
clean. Inspect LPG cylinder and
heater LPG connections for
damage before attaching.
• During set up, check all connections
and fittings for leaks using soapy
water. Bubbles indicate a leak. Never
use a flame.
■ Unit includes Heater
Assembly, Regulator
Assembly, and Base.
The LPG tank is not
included.
■ Turn HEATER VALVE to OFF.
■ Place fuel cylinder on a solid
surface. Press Base over fuel
cylinder.
■ Use both hands to firmly press
the Base in place.
Note: Using the heater without the
Base on the fuel cylinder will void
compliance with CAN1-11.3-M79.
Base
Base
Regulator
Heater