Filter
Top Products
12
10008388
Heater Control
Your fireplace features a heater with a built-in thermo-
stat and a variable temperature setting that can be
controlled either by remote control or at the touchpad
control panel. By depressing button 4 once, the heater
will be activated and the LED visual indicator B lights
up to indicate the temperature setting of the heater
between the lowest (lowest light bar) and highest
(highest light bar). To determine the room temperature,
depress button 5 or 6 to decrease or increase until the
heater goes off or comes on. The heater is designed
to safely deliver the maximum amount of heat when it
is turned on. To increase the room temperature,
depress button 6 to increase room temperature set-
ting. When the set temperature is reached, the heater
will automatically cycle on and off to maintain the tem-
perature setting for the room. It is suggested that you
increase the temperature setting gradually to a room
temperature that you are comfortable with. For your
added convenience, the temperature setting is stored
in memory when the heater is turned off.
Wood Burning/Crackling Sound Effect
Your fireplace features a realistic wood burning/crack-
ling sound effect. Depressing button 7 switches the
sound effect off or on while the flame is on. If the flame
is switched off, the sound effect will go off but will
come back on when the flame is switched back on.
Overhead Light
Your fireplace features overhead lights that add
warmth and glow to the refractories and logs. It is
turned on or off either by remote control or at the
touchpad control panel. Depressing button 8 switches
the overhead lights on or off while the flame is on. If
the flame is switched off, the overhead lights will go off
but will come back on when the flame is switched back
on. This feature is not available on the HEF22.