Clarke CAV 26 Vacuum Cleaner User Manual


 
Page -7-
Clarke
®
American Sanders Operator's Manual - CAV 26
OPERATING INSTRUCTIONS
4. Install a poly-liner (fig. 7, 1) in the debris canister
(fig. 7, 2). To release the debris canister raise
the lever (fig. 7, 3) as shown.. The poly-liner
provides quick convenient disposal.
5. When the debris canister becomes full, the
manometer (fig. 8, 1) reads in the red,
deactivating all vacuum motors.
6. Allow time for the dust to settle, then operate the
filter cleaning lever (fig. 9, 1) several times.
7. Remove the poly-liner and replace with a new
liner.
8. Replace the debris canister. To fit the canister
back in place, set it under the vacuum and push
the lever downwards. This allows the canister to
lift until it fits against the filtering chamber.
3
1
2
Figure 7
Figure 8
Figure 9
1
1