Cisco Systems QC-29 Water System User Manual


 
Configuring Modular Quality of Service Congestion Management on Cisco IOS XR Software
Where to Go Next
QC-49
Cisco IOS XR Modular Quality of Service Configuration Guide
policy-map p2
class voip
police cir percent 20
commit
RP/0/RP0/CPU0:Jun 8 16:51:51.679 : config[65546]: %MGBL-LIBTARCFG-6-COMMIT :
Configuration committed by user 'cisco'. Use 'show configuration commit changes
1000006135' to view the changes.
exit
exit
interface bundle-poS 1
service-policy input p2
commit
RP/0/RP0/CPU0:Jun 8 16:52:02.650 : config[65546]: %MGBL-LIBTARCFG-6-COMMIT :
Configuration committed by user 'cisco'. Use 'show configuration commit changes
1000006136' to view the changes.
The following example shows the display output for the successful policy map configuration in which
policing was configured in percentage:
RP/0/RP0/CPU0:router# show policy-map interface bundle-poS 1
Bundle-POS1 input: p2
Class voip
Classification statistics (packets/bytes) (rate - kbps)
Matched : 0/0 0
Policing statistics (packets/bytes) (rate - kbps)
Policed(conform) : 0/0 0
Policed(exceed) : 0/0 0
Policed(violate) : 0/0 0
Policed and dropped : 0/0
Class default
Classification statistics (packets/bytes) (rate - kbps)
Matched : 0/0 0
Transmitted : 0/0 0
Total Dropped : 0/0 0
Queueing statistics
Vital (packets) : 0
Queueing statistics
Queue ID : 36
High watermark (packets) : 0
Inst-queue-len (bytes) : 0
Avg-queue-len (bytes) : 0
TailDrop Threshold(bytes) : 239616000
Taildropped(packets/bytes) : 0/0
Where to Go Next
To configure WRED and tail drop, see the “Configuring Modular QoS Congestion Avoidance on
Cisco IOS XR Software” module.
To configure traffic classification techniques, see the “Configuring Modular Quality of Service Packet
Classification on Cisco IOS XR Software” module.
To read Cisco IOS XR QoS overview information, see the “Modular Quality of Service Overview on
Cisco IOS XR Software” module.