Cisco Systems PG30 G-.TN Burner User Manual


 
6
MOUNTINGS AND CONNECTIONS
The burners are despatched in cardboard packages.
The packaging contains the following items:
1 burner;
2 flexible light oil tubes;
1 light oil filter;
1 gasket to be inserted between the burner and the boiler;
1 this manual, the Guarantee Certificate and the test certificate.
To get rid of the burner’s packing and in the event of scrapping of the latter, follow the procedures
laid down by current laws on disposal of materials.
PG25SP - PG30TN
After fitting the burner to the boiler see that the
space between the blast tube and the refractory
lining is sealed with appropriate insulating material
(ceramic fibre cord or refractory cement).
FITTING BURNER TO BOILER
G18SP
Attach the flange of the burner to the boiler with the
reference as shown in picture. This allows a correct
inclination towards the combustion chamber
Key
1) Burner
2) Fixing nut
3) Washer
4) Seal
5) Stud bolt
6) Sightglass cleaning tube
7) Blast tube
Fig. 4
Fig. 4a
INSTALLATION