Filter
Top Products
15-44
Cisco ONS 15454 SDH Reference Manual, R4.6
April 2008
Chapter 15 Performance Monitoring
15.6.5 TXP_MR_10G Card Performance Monitoring Parameters
Table 15-48 Near-End or Far-End OTN G.709 PM Parameters for TXP_MR_10G Cards
Parameter Definition
BBE-SM Section Monitoring Background Block Errors (BBE-SM) indicates the
number of background block errors recorded in the optical transport
network (OTN) section during the PM time interval.
ES-SM Section monitoring errored seconds (ES-SM) indicates the errored
seconds recorded in the OTN section during the PM time interval.
SES-SM Section Monitoring Severely Errored Seconds (SES-SM) indicates the
severely errored seconds recorded in the OTN section during the PM time
interval.
UAS-SM Section Monitoring Unavailable Seconds (UAS-SM) indicates the
unavailable seconds recorded in the OTN section during the PM time
interval.
FC-SM Section Monitoring Failure Counts (FC-SM) indicates the failure counts
recorded in the OTN section during the PM time interval.
ESR-SM Section Monitoring Errored Seconds Ratio (ESR-SM) indicates the
errored seconds ratio recorded in the OTN section during the PM time
interval.
SESR-SM Section Monitoring Severely Errored Seconds Ratio (SESR-SM)
indicates the severely errored seconds ratio recorded in the OTN section
during the PM time interval.
BBER-SM Section Monitoring Background Block Errors Ratio (BBER-SM)
indicates the background block errors ratio recorded in the OTN section
during the PM time interval.
BBE-PM Path Monitoring Background Block Errors (BBE-PM) indicates the
number of background block errors recorded in the OTN path during the
PM time interval.
ES-PM Path Monitoring Errored Seconds (ES-PM) indicates the errored seconds
recorded in the OTN path during the PM time interval.
SES-PM Path Monitoring Severely Errored Seconds (SES-PM) indicates the
severely errored seconds recorded in the OTN path during the PM time
interval.
UAS-PM Path Monitoring Unavailable Seconds (UAS-PM) indicates the
unavailable seconds recorded in the OTN path during the PM time
interval.
FC-PM Path Monitoring Failure Counts (FC-PM) indicates the failure counts
recorded in the OTN path during the PM time interval.
ESR-PM Path Monitoring Errored Seconds Ratio (ESR-PM) indicates the errored
seconds ratio recorded in the OTN path during the PM time interval.
SESR-PM Path Monitoring Severely Errored Seconds Ratio (SESR-PM) indicates
the severely errored seconds ratio recorded in the OTN path during the PM
time interval.
BBER-PM Path Monitoring Background Block Errors Ratio (BBER-PM) indicates
the background block errors ratio recorded in the OTN path during the PM
time interval.