Filter
Top Products
CHAPTER
2-1
Cisco Video Surveillance IP PTZ Dome Camera User Guide, Cisco 2900 Series IP Dome
OL-24281-01
2
Operation
This chapter describes how to operate the Cisco 2900 Series IP Dome camera.
Before you begin, install the dome as described in Chapter 1, “Installation.” After installed, apply power
to the system. The system will complete a configuration sequence.
This chapter includes these topics:
• System Requirements, page 2-1
• Accessing the IP Device, page 2-2
• Live Video Page, page 2-2
• Settings Page, page 2-7
• System Tab, page 2-7
• Network Tab, page 2-10
• Camera Configuration Tab, page 2-17
• A/V Streams Tab, page 2-23
• Users Tab, page 2-37
• Events Tab, page 2-40
System Requirements
Network and processor bandwidth limitations might cause the video stream to pause or appear pixilated
when additional Web-interface users connect to the camera. Decrease the images per second (ips),
resolution, compression, or bit rate settings of the Web interface video streams to compensate for
network/processor limitations.
The following system requirements are needed to use a web browser with the camera:
• Processor—Intel Core 2 Duo microprocessor, 2.6 GHz
• Operating system—Microsoft Windows XP
• Memory—2 GB RAM
• Network interface card—100 megabits or greater
• Monitor—Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color resolution
• Web browser—Internet Explorer 8.0 or later
• Media player—QuickTime 7.6.5 for Windows XP