Filter
Top Products
6-2
Installation and Upgrade Guide for Cisco Unified Videoconferencing 3522 BRI Gateway and 3527 PRI Gateway Release 5.5
OL-14910-01
Chapter 6 Safety
ESD Procedures
Caution This is a class I unit. In Denmark, use this unit with an AC cord suited to Danish specifications. The cord
should include an earthing conductor. Plug the unit into a wall socket outlet which is connected to the
protective earth contact. Do not use socket outlets which are not connected to a protective earth contact!
Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan.
Apparatet må tilkoples jordet stikkontakt.
Apparaten skall anslutas till jordat uttag.
High Voltage
Disconnect the Cisco Unified Videoconferencing 3500 Gateway unit from the power line before
removing the cover. Avoid any adjustment, maintenance, or repair of an opened chassis under voltage.
These actions should only be carried out by a skilled person who is aware of the dangers involved.
Capacitors inside the chassis may still be charged, even if the unit has been disconnected from the power
source.
ESD Procedures
To prevent damage to the Cisco Unified Videoconferencing 3500 Gateway unit by random electrostatic
discharge (ESD), the use of wrist straps is highly recommended.