Filter
Top Products
RMF1 Installation Instructions
4
TOOLS REQUIRED FOR INSTALLATION
REF DESCRIPTION QTY REF DESCRIPTION QTY
10 PLATE, Wall 1 130 SCREW, Phillips, M4 x 16 (Parts Bag A) 8
20 BRACKET, Interface (Rt) 1 140 SCREW, Phillips, M4 x 25 (Parts Bag A) 8
30 BRACKET, Interface (Lft) 1 150 WASHER, Flat, #10 (Parts Bag A) 8
40 SCREW, Phillips, M8 x 20 (Parts Bag A) 6 160 WASHER, Flat, 1/4” (Parts Bag A) 8
50 SCREW, Phillips, M8 x 30 (Parts Bag A) 6 170 SPACER, 1/4” (Parts Bag A) 8
60 SCREW, Phillips, M8 x 45 (Parts Bag A) 6 180 SPACER, 1/2” (Parts Bag A) 8
70 SCREW, Phillips, M6 x 25 (Parts Bag A) 8 190 WASHER, Shoulder, .195”ID (Parts Bag A) 8
80 SCREW, Phillips, M6 x 16 (Parts Bag A) 8 200 WASHER, Shoulder, .320”ID (Parts Bag A) 8
90 SCREW, Phillips, M5 x 25 (Parts Bag A) 8 210 BOLT, Lag, 5/16” (Parts Bag B) 4
100 SCREW, Phillips, M5 x 20 (Parts Bag A) 8 220 WASHER, 5/16” (Parts Bag B) 4
110 SCREW, Phillips, M5 x 16 (Parts Bag A) 8 230 SCREW, Self-Tapping (icluded but not shown) 2
120 SCREW, Phillips, M4 x 20 (Parts Bag A) 8
#2
1/2" (12.7mm)