Filter
Top Products
4. Operating Instructions 8 1/12/2011 11:51 AM
4. OPERATING INSTRUCTIONS
Using the Control Panel
Access control panel functions using the four buttons located directly underneath the LED
display.
BUTTON FUNCTION
<MODE/
ESC>
Used to scroll through the current
operating mode, as well as back
out of the current menu option
<DOWN>
Used to select a decreasing value
<UP>
Used to select an increasing
value
<ENTER>
Used to activate a selection and
store it to memory
Menu Map
Mode Programming Description
DMX Mode Addr
d001~d512 Selects the DMX starting address
Slave
Operation
SLAU
H-
NO
The Slave fixture follows the actions of
the Master fixture
YES
The Slave fixture mirrors the actions of
the Master fixture
Sound-active SoUd rUn
Triggers the built-in program to the beat
of the music, using the internal
microphone
Automatic P-
P-_1~10 Selects one of the built-in programs
S 01~S100
Adjusts the speed of the automatic
program
Configuring the Starting Address
The Sweeper™ LED fixture uses up to eight DMX channels.
In this DMX
configuration/personality, the highest configurable address is 505. Any address higher than this
will prevent access to all of the channels while in this mode; however, if you desire to use one of
the other DMX configurations (personalities), please consider the total DMX channels when
selecting a DMX address.
If this is your first time using DMX, we recommend
reading the “DMX Primer” section in the
“Appendix”.