Cylinder valve must face to rear of cart once
cylinder is attached. Failure to install cylinder
correctly may allow gas hose to be damaged in
operation, resulting in the risk of fire.
CAUTION
Step 9
Place cover assembly onto top. Align lower hinge
holes with holes on back side of top. Secure using
two .#8x1/2” self-tap screws
#8x1/2”
Self-Tap Screw
Qty: 2
Cover assembly
29100873
#8x1/2”
Self-Tap Screw
Step 10
LP GAS CYLINDER IS SOLD SEPARATELY.
Make sure cylinder valve is
facing to the rear.
Read “ ” in
the Use and Care section of this manual.
See Use & Care section of this manual to perform the
“Burner Flame Check” and for important safety
instructions before using.
Fill and
leak check the cylinder before attaching to Outdoor Stove
Top and regulator (see Use & Care section). Once
cylinder has been filled and leak checked, place cylinder
into cylinder hole in base.
Secure cylinder with cylinder screw
under base.
Connecting Regulator to the LP Cylinder
LP gas cylinder
(not included)
Always keep LP cylinders in upright position
during use, transit or storage.
Cylinder screw
17