Filter
Top Products
Rev E Doc 01-20201 21 of 33
Figure 19. Bi-Directional Trap Gate System
(Swing gate opens out).
NOTE: If Radio will be used in both gates, each gate will require a separate receiver/transmitter with a
separate entry code.
Gate
Operator
Master
Gate
Operator
Slave
Directional Exit Loop
Swing gate open
direction and its
maximum arc.
Directional Exit Loop
Outside Interrupt Loop
Inside Interrupt Loop
Inside Interrupt Loop
Outside Interrupt Loop
Slide or Barrier Gate
Slide, Barrier or Swing Gate
Additional
Master Wiring
(if needed):
Fire
Manual Inputs
Interrupt Bar
Photo-Sensors
MagLock
Tel . L ine
Additional
Slave Wiring
(if needed):
Interrupt Bar
Photo-Sensors
MagLock
1398F15
Master/
Slave
Cable
Shadow Loop
(swing gates only)
Can use Radio or Cycle if
Exit Loop is not used.
Can use Radio or Cycle if
Exit Loop is not used.