Filter
Top Products
LOCK
LIGHT
LOCK
LIGHT
953CB
956CB
935CB
41A5281
Motion Detecting Control Panel:
Multi-function door control with
motion sensor that automatically turns
opener lights on for 5 minutes when it
detects a person entering the garage.
Sensor can be easily deactivated when
desired.
940CB
SECURITY✚ Keyless Entry:
Enables homeowner to operate garage door opener from outside by entering a password
on a specially designed keyboard. Also can add a temporary password for visitors or
service persons. This temporary password can be limited to a programmable number of
hours or entries.
SECURITY✚ Multi-Function
Mini Remote Control:
With key ring and Velcro fastening
strip.
Outside Quick Release:
Required for a garage with NO
access door. Enables homeowner to
open garage door manually from
outside by disengaging trolley.
950CB
38
945CB
Multi-Function Door Control Panel:
Provides a Lock Feature which
prevents operation of garage door
opener from portable remotes and a
Light Feature for constant light.
7702CB
Accessories Available For Your Opener
SECURITY✚ Single-Function
Remote Control:
Includes visor clip.
SECURITY✚ Multi-Function
Remote Control:
Includes visor clip.
8 foot Rail Extension Kit:
To allow an 8 foot door to open
fully.
Extension Brackets:
(Optional) For safety sensor
installation onto the wall or floor.
To order call: 1-800-528-9131
7706CB
To Add the Keyless Entry
We recommend that you program your password before you
install the Keyless Entry. You will not need assistance, and
you can test the reception at the mounting location before
installation.
If you have a Multi-Function door control:
1. With the door closed, press the four digit password desired,
then press and hold Enter.
2. Press and hold the light button on the door control.
3. Press and hold the door control push bar.
4. After the opener lights flash, release all buttons.
If you do not have a Multi-Function door control:
1. Choose a 4-digit password using numbers from 0 to 9 (a
number can be used more than once, for example, 4, 0, 4, 1).
2. Press the four buttons for the password, then press and hold
the Enter button. The indicator light on the door opener
panel will blink.
3. Press and release the “Smart” (learn) button on the opener
panel. After the opener lights flash, release the Enter button.
Test by pressing the password, then press Enter. The door
should begin to move.
Setting a Temporary Password
In addition to your personal entry password which works at all
times, a 4-digit temporary password can be added for the
convenience of visitors or service persons. This allows
authorized persons a way to gain temporary access.
After a programmed number of hours or number of accesses,
this temporary password expires and will no longer open the
door. The temporary password can be used to close the door
even after it has expired. To set a temporary password:
1. Press the four buttons for your personal entry password (not
the last temporary password), then press and hold the ✽
button.
The opener light will blink three times. Release the button.
2. Press the temporary 4-digit password you have chosen, then
press Enter.
The opener light will blink four times.
3. To set the number of hours this temporary password will
work, press the number of hours (up to 255), then press ✽.
OR
3. To set the number of times this temporary password will
work, press the number of times (up to 255), then press #.
The opener light will blink once when the temporary password
has been learned.
Test by pressing the four buttons for the temporary password,
then press Enter. The door should move. If the temporary
password was set to a certain number of openings, remember
that the test has used up one opening.
To clear the temporary password, repeat steps 1-3, setting the
number of hours or times to 0 in step 3.