Filter
Top Products
LOCK
LIGHT
34
Accessories Available For Your Opener
Model 59LMC
Model 974LMC
Model 1702LMC
SECURITY✚ 3-Channel
Remote Control:
Includes visor clip.
SECURITY✚ 4-Channel
Remote Control:
Includes visor clip.
SECURITY✚ 3-Channel Mini
Remote Control:
With key ring and Velco fastening
strip.
Extension Brakcets:
(Optional) For safety sensor
installation onto the wall or floor.
Outside Keylock:
Opens the garage door
automatically from outside when
remote control is not handy.
Outside Quick Release:
Required
for a garage with NO
access door.
10 foot Complete Rail:
To allow a 10 foot door to
open fully.
8 foot Complete Rail:
To allow an 8 foot door to
open fully.
Model 973LMC
Model 1778LMC
Model 1770LMC
Model 97LMC
SECURITY✚ Keyless Entry:
Enables homeowner to operate
garage door opener from outside by
entering code on specially designed
keyboard. Also can add a temporary
pass code for visitors or service
persons. This temporary code can be
limited to a programmable number of
hours or entries.
Model 976LMC
Model 970LMC
Motion Detecting Door Control
Panel:
Multi-function door control with
motion sensor that automatically
turns opener lights on for 5 minutes
when it detects a person entering
the garage. Sensor can be easily
deactivated when desired.
Model 98LMC
We recommend that you program your code
before you install the Keyless Entry. You will not
need assistance, and you can test the reception at
the mounting location before installation.
1. Choose a 4-digit code using numbers from 0 to 9
(a number can be used more than once, for
example, 4, 0, 4, 1).
2. Press the four buttons for the code, then press and
hold
the Enter button. The indicator light on the
door opener panel will blink.
3. Press and release the “Smart” (learn) button on
the opener panel. After the opener lights flash,
release the Enter button.
Test by pressing the the code, then press Enter. The
door should begin to move.
You may also program the Keyless Entry from the
Multi-Function Door control, as follows:
1.
With the door closed,
enter the four digit code
desired, then press and hold Enter.
2. Press and hold the light button on the door control.
3. Press and hold the door control push bar.
4. After the opener lights flash, release all buttons.
To Add the Keyless Entry