Filter
Top Products
19
CR Series Woodburning Fireplaces
20001316
Accessory
Description Model No.
P325g
firestop
SKFS2A
SKFS6A
3/4/99 djt
Firestop
Used to support the chimney at each
30 feet of vertical height above the
hearth and at every 6 feet of inclined
chimney run. Each support adds 2¹⁄₂
inches to chimney length.
Required at each floor level and attic
on multi-story installation.
Gives traditional chimney top look
using simulated brick in red, tan or
white color. Brick pattern is em-
bossed into galvanized steel unit.
Roof flashing is included. Appropri-
ate adapter is required.
See Sections 2 and 3.
Required to extend Traditional Top
Housings on steeply pitched roofs.
Used to terminate chimney at the
top of a chase. Flashing is not
included. Appropriate adapter is
required. See Sections 2 and 3.
SKCS8
(8” flue)
SKFS2A (8” straight flue)
SKFS6A (8” 30° inclined flue)
S20BR/BT/BW
202036
(single flue)
204436
(double flue)
SLTSK8
or
PLTSK8
Top Housings
Housing Extensions
P325j
Chase top housings
SLTSK8, PLTSK8
3/5/99 djt
Contemporary Chase Top
Terminations
PLTSK8
SLTSK8
P325f-j
P325f
Chimney Support
SKCS8
3/4/99 djt
Chimney Support
P325i
housings extensions
3/4/99 djt
P325h
top housings
4/28/99 djt