Filter
Top Products
- 11 -
Fig. 20a
FLAME ADJUSTMENT (RN/RP MODELS)
For units equipped with Hi/Lo valves, flame adjustment
is accomplished by rotating the Hi/Lo adjustment knob
located near the centre of the gas control. (Fig. 20a & b)
L
O
H
I
Turn
counterclockwise
to increase
flame height.
Turn clockwise
to lower
flame height.
L
O
H
I
Turn
counterclockwise
to decrease
flame height.
Turn clockwise
to increase
flame height.
It is important to periodically perform a visual
check of the pilot and the burner flames.
Compare them to the pictorials illustrated
below (Fig. 22, 23). If any of the flames
appear abnormal call a service person.
FLAME CHARACTERISTICS
Fig. 23
A232
3/8" - 1/2"
Fig. 22
Fig. 20b
SIT VALVE
PSE VALVE