Filter
Top Products
Century S244 Installation and Operation Manual
43
When using the optional blower, allow the stove to reach operating temperature
(approximately one hour), before turning it on. The increased airflow from the blower cools
the firebox and could affect the start-up combustion efficiency if the blower is turned on too
early. You can also install a thermodisc to enable the blower to start or stop automatically
when the stove is hot or too cold. The thermodisc kit part number is AC05530 for a basic
model and ACO2055 for a quick connect model.
Installation instructions are supplied with the blower and the thermodisc kit.
CAUTION: ENSURE THAT THE BLOWER’S POWER CORD IS NOT IN CONTACT
WITH ANY SURFACE OF THE STOVE TO PREVENT ELECTRICAL SHOCK OR FIRE
DAMAGE. DO NOT RUN THE POWER CORD BENEATH THE STOVE.