Filter
Top Products
Edition 10/2003
7
--- Present the badge in front of the PROMI1000 or in front the external reader
(nal reader: see Menu 10)
OR
Select a user number, enter the 3-digit user number from 000 to 999
--- If the user number is available the LED lights on in Green present the badge in front the
PROMI 1000 or in front of the external reader
--- If the user number is not available enter another user number or press on * twice to
delete the badge and Pin code.
Then present a badge in front of the PROMI 1000 or external reader.
--------------------------------------------------------------------------------------------------------------------------
--- Enter the 5-digit Pin code
OR
--- Press * to skip the pin code
Another search is launch to select an available user number.
-------------------------------------------------------------------------------------------------------------------------
When all the user numbers are full then the PROMI 1000 displays an error.
-------------------------------------------------------------------------------------------------------------------------
An error is displayed when a badge has been already programmed
-------------------------------------------------------------------------------------------------------------------------
If the printer is connected during the programming then the user number, code of badge and Pin
code are printed.
The last 8-digit of the code of the badge are printed.
D. Menu 01 – Operating mode
Press 01 to enter in the operating mode menu
Press 0 to select Badge & Pin code operating mode.
The LED lights on in green
OR
Press 1 to select badge only operating mode.
The LED lights on in green
G1
G1
O4
O1
O1
O1
G1
R1
G1
O1
O4