Filter
Top Products
17
Figure 14
A
B
Figure 15
Figure 16
Figure 17
Flame
failure
probe "T"
Ignitor "S"
The triple ring burner must be correctly
positioned (see fig. 14); the burner ribs
must be fitted in their housing as
shown by the arrow.
The burner correctly positioned must
not rotate (fig. 15).
Then position the cap “A” and the ring
“B” (figs. 15 - 16). They shall be level.
✓ The pan support shall be correctly
positioned as indicated in fig. 17.
The pan support shall be level and
must not rotate.
Be sure not to fit the auxiliary, semi-
rapid or rapid burner pan support on
the triple-ring burner. The auxiliary,
semirapid or rapid burner pan sup-
port IS ONLY to be used on the auxil-
iary, semirapid or rapid burners.
MODELS WITH TRIPLE RING BURNER -
CORRECT POSITIONING OF THE TRIPLE RING BURNER