Casio AP-31V Air Conditioner User Manual


 
E-22
427B-E-026A
Setting the Keyboard Channel
This parameter sets the channel for MIDI messages to an ex-
ternal device. You can set any MIDI channel in the range of 1
to 16 as the keyboard channel.
To set the Keyboard Channel
While still holding down the CONTROL button, se-
lect the Keyboard channel by pressing one of the key-
board keys illustrated below.
Example: Channel 8
A note does not sound when you press a keyboard key
while holding down CONTROL.
NOTE
The Keyboard Channel is automatically set to 1 whenever you
turn on CELVIANO power.
Assigning Tones to Individual Channels
You can assign tones to channels using a Program Change mes-
sage sent from a connected MIDI device. You cannot change the
tone assigned to each channel from the CELVIANO.
NOTE
The tone GRAND PIANO is automatically assigned to all chan-
nels whenever you turn on CELVIANO power.
Sending Memory Playback Data
You can send memory playback as MIDI data. The send chan-
nel used depends on the Keyboard Channel setting, as shown
in the table below.
* When you have Channel 16 set as the keyboard channel,
memory playback is send over Channel 1.
Pedal effect data recorded to the memory is applied to play-
back from the memory, and does not affect your perfor-
mance on the keyboard. Likewise, pedal operations on the
CELVIANO are applied to the keyboard only, and not to
playback from the memory.
Keyboard Play Keyboard Channel
Memory Keyboard Channel + 1*
C
4
C
7 (black key)
B
5 (black key)
AP31/33_E_21_25.p65 03.10.7, 11:00 AMPage 22 Adobe PageMaker 6.5J/PPC