Filter
Top Products
www.CasablancaFanCo.com
1.888.227.2178
8
M8527-01 • 04/16/15 • © 2015 Casablanca Fan Company
KEEP!
8”
3/8”
C
U
T
&
S
T
R
I
P
(not to scale)
Remove the pre-installed
setscrew so that the downrod
can be inserted.
Slide the adapter cover onto the
downrod (for standard mount only),
then hand tighten the downrod at
least 4-5 full turns until it stops.
The wires can be cut,
but leave at least 8”
extending from the top
of the downrod.
Downrod (continued)
8”
3/8”
Tighten the setscrew
with pliers. DO NOT
HAND TIGHTEN.
If the setscrew is not tightened
securely, the fan may fall.
K
E
E
P
!
Note: The adapter cover is not
used for Low Prole mounting.