Filter
Top Products
www.CasablancaFanCo.com
1.888.227.2178
Switch Housing & Light Kit
Feed the wire plug through the center
hole of the upper switch housing, then
wrap keyhole slots around the screws and
twist counterclockwise.
Screw two upper switch housing screws
from the hardware bag halfway into
the mounting plate on the bottom of the
motor housing. It does not matter which
two screw holes you choose.
Insert the third upper switch housing
screw, found in the hardware bag, into
place and then tighten all three screws.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the
switch housing xture falling.
14
M8527-01 • 04/16/15 • © 2015 Casablanca Fan Company