Filter
Top Products
www.CasablancaFanCo.com
1.888.227.2178
Switch Housing (continued)
Connect the 9-pin plug connector from
the switch housing to the 9-pin plug
connector coming from the motor
housing. Make sure to line up the colored
markings on the connectors.
Align the posts inside the lower switch
housing with the notches in the upper
switch housing. Lift the lower switch
housing up as far as it will go, then rotate it
clockwise until the posts are held tightly in
place by the notches.
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure the posts
could result in the switch housing xture falling.
CONGRATULATIONS!
YOU’RE DONE!
Post
Notch
M8520-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company
16