Filter
Top Products
www.CasablancaFanCo.com
1.888.227.2178
Switch Housing
Insert the third screw, found in
the hardware bag, into place and
then tighten all three screws.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the switch
housing xture falling.
Feed the wire plug through the center
hole of the upper switch housing, then
wrap keyhole slots around the screws and
twist counterclockwise.
Screw two switch housing assembly
screws, found in the hardware bag,
halfway into the motor housing. It does not
matter which two screw holes you choose.
M8520-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company
15