Filter
Top Products
www.CasablancaFanCo.com
1.888.227.2178
Light Kit (continued)
CONGRATULATIONS!
YOU’RE DONE!
See next page for fan
operation instructions.
To install the bulb shield, raise
the bulb shield to the light kit
assembly and push the clips
onto the sockets.
To install the halogen bulb, angle
one end of the bulb into the
socket as shown, then push the
other socket inward and lift the
bulb up until it ts into place.
Clip
Align the the notches in the
globe assembly with the tabs in
the light kit tter. Carefully lift
the globe assembly as far as it
will go, then rotate it counter-
clockwise until it is held into
place by the three tabs.
Notch
Tab
Bulb
When installing a halogen bulb, carefully cut off
the end of the plastic sleeve packaging and hold the
bulb by the plastic sleeve to screw it into the socket.
Note: In compliance with US federal energy regulations, this ceiling
fan contains a device that restricts its light output. Exceeding the
wattage limit marked on the MAX wattage sticker afxed to the
light socket(s) may result in re hazard or improper operation.
M8511-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company
15