Filter
Top Products
www.CasablancaFanCo.com
1.888.227.2178
15
M6026-01 • 04/16/15 • © 2014–2015 Casablanca Fan Company
Switch Housing
Make sure the upper switch housing is securely attached
to the mounting plate. Failure to properly secure all 3 assembly
screws could result in the switch housing xture falling.
Partially install two upper switch housing
screws, found in the hardware bag,
halfway into the motor housing. It does not
matter which two screw holes you choose.
Feed the wire plug through the center
hole of the upper switch housing, then
wrap keyhole slots around the screws and
twist counterclockwise.
Install the third screw, found in
the hardware bag, then tighten
all three screws securely.