Filter
Top Products
Grinding Tips
• Never grind in advance, only grind the amount of coffee you will use. Ground
coffee loses aroma and flavor quickly and attracts other odors.
• Do not grind for more than one minute at a time. Let machine cool down for 5
minutes before grinding again.
• Empty the ground coffee container before it is completely full. Otherwise ground
coffee can back up into the grinding chute (H) and block the grinding mechanism.
• Before removing the ground coffee container, tap the machine a few times.
This will relieve some of the static build-up which occurs during grinding.
CLEANING
Always unplug your coffee grinder before cleaning. We recommend cleaning
your grinder one to two times per week to maintain top efficiency.
• Empty the bean container of any whole beans.
• Remove the ground coffee container (F), ground coffee container lid (G), coffee
bean container (B) and the bean container lid (A) and clean them in a warm
water and mild liquid soap solution. Do not place these items in the dishwasher.
• Remove ground coffee from the grinder chute (H) with the included brush (M)
stored on the back of the machine or a small plastic tool.
• The base (D) of the grinder can be wiped clean with a damp cloth.
CAUTION: Never immerse the grinder in water or any other liquid. Do not use
harsh or abrasive materials to clean the coffee grinder.
IMPORTANT: Any servicing other than cleaning and user maintenance should
be performed by an authorized Capresso service representative.
CLEANING/REMOVING THE UPPER BURR DISK
1. Remove the coffee bean container (B) by twisting it to the right (Fig 4.) then
pulling straight up.
2. Turn upper burr (K) to the right towards the unlock symbol, to unlock. (Fig. 3)
3. Lift the upper burr out of the grinder. Clean both the upper burr (K/Fig. 2) and
lower burr (L/Fig. 5) with the included brush (M).
IMPORTANT: Do not unscrew the upper burr or lower burr from its housing!
4. Replace the upper burr (K) into the grinder and turn it to the left towards the
lock icon. (Fig 3.)
TROUBLESHOOTING
Grinder shuts off shortly after it is turned on.
- Check that upper burr disk (K) is locked into place by turning it to the left
towards the lock icon. (Fig. 3)
- Check that coffee bean container (B) is locked by turning it to the left (Fig. 4)
- Check that the ground coffee container (F) and ground coffee container lid (G)
are both in place.
No ground coffee is going into ground coffee container.
- Unplug the unit and check the grinder chute (H) for any clogs.
Clean the grinder chute often.
- Check that the upper burr disk (K) is in place and locked. (Fig. 3)
Grinder clogs easily.
- Unplug the unit and ensure the grinder chute (H) is clear of any clogs.
Clean the grinder chute often.
- Try a new type of coffee bean. Do not use coated beans.
- If you are using oily beans, try a coarser grind setting.
6.