Filter
Top Products
BEFORE FIRST USE
IMPORTANT: Coffee grinder will stop automatically when there are no more
beans in the bean container or if parts are not correctly aligned on the machine.
1. Unpack the grinder and remove all packaging materials.
2. Clean all loose parts with a dry cloth. NEVER clean any parts of the grinder
in the dishwasher.
3. To remove any dust that may have accumulated on the removable parts
during packing, wash the ground coffee container (F), its lid (G), the bean
container (B) and the lid of the bean container (A) with a warm water and a
mild liquid soap solution. Rinse and dry.
IMPORTANT: Do not use harsh or abrasive agents to clean these parts.
4. Allow parts to dry completely before use.
WARNING: Putting wet parts back onto the grinder can damage the machine.
CAUTION: Do not immerse grinder or the removable grinding disk (K) in water.
IMPORTANT: Do not place the ground coffee container (F), its lid (G), the
bean container (B) or the bean container lid (A) in the dishwasher.
5. Check the bean container (B) for presence of foreign objects before using.
6. Make sure the bean container is completely clean and dry before using.
7. Ensure upper burr disk (K) is locked into place by turning it to the left
towards the lock icon. (Fig 3.)
8. Ensure the coffee bean container (B) is locked in place by turning it all the
way to the left (Fig 4.)
9. Always operate the grinder with the ground coffee container (F) and lid (G)
in place.
10. Do not place your hand in or near the burrs.
11. Any servicing other than cleaning and user maintenance should be performed
by an authorized Capresso service representative.
IMPORTANT: Coffee grinder will not operate if the upper burr (K) is not locked
or if the coffee bean container (B), ground coffee container (F) and lid (G) are
not properly in place.
GRINDING
1. Place your Ceramic Burr Grinder on a flat, level surface.
2. Ensure all parts are locked into place as described in BEFORE FIRST USE.
3. Plug the grinder into an outlet.
4. Adjust the fineness selector (C) to the desired setting (see Section
"Guidelines for Fineness Selector Settings").
NOTE: Always adjust the fineness selector before adding beans to the bean
container as the machine can be damaged otherwise.
CAUTION: Never change the fineness selector setting while grinding!
4.
IMPORTANT: Grinder was tested with beans during assembly. Despite cleaning,
traces of ground coffee may be found in a new machine.