Filter
Top Products
4
Installation / Assembly
Cal Flame Side Burners
LTR50001082, Rev. B
www.calspas.com
Installation / Assembly
Most cities and counties require permits for exterior construction and
electrical circuits. In addition, some communities have codes requiring
residential barriers such as fencing and/or self-closing gates on prop-
erty to prevent unsupervised access to the property by children under
the age of ve. Your dealer can provide information on which permits
may be required and how to obtain them prior to the delivery of your
equipment.
We recommend the installation, adjustment and service of your new
side burner be performed by LMS qualied installers and service tech-
nicians to ensure proper operation and prevent accidents.
When planning your Cal Flame side burner location, access to gas lines
should be considered. The location with the shortest gas line run is
recommended.
When determining a suitable location, consider factors such as expo-
sure to wind, proximity to trafc paths, and windows that open into
the home.
Cabinet Cut-out Dimensions
Your Cal Flame side burner is de-
signed for easy installation into a
non-combustible enclosure. The
supporting deck or counter must
be at and level. When determin-
ing the nal location of your side
burner, adequate cross ventilation
must be present to prevent gas
from being trapped in the event of
a leak.
The drawing at right shows the dif-
ferent types of cabinet cut-out di-
mensions for slide-in side burners.
Model Description Width Depth Height
BBQ08954P Deluxe Side by Side Burner 25 ¼” 12 ½” 7 ¼”
BBQ08899P Deluxe Double Side Burner 12 ¼” 22” 7 ¼”
WIDTH
DEPTH
HEIGHT